ACTIVE TRAFFIC ADVISORIES (VIEW ALL):

PA Turnpike TRIP TALK APP

PA Turnpike Trip Talk rack card

IPHONE APPLICATION FAQ

ATTENTION IPHONE USERS:  For the best experience using this app, your iPhone's location services for this app must be set to "Always."  This allows the app to provide alerts even when it is not on the main screen, or when the phone goes into sleep mode.  To verify that this setting is correct, go to Settings -> Privacy -> Location Services.  Please be sure that the general Location Services button is set to on/green, and then select "Always" next to the app.


Below are a few of the questions you might have or problems you may experience, along with our suggested resolution.

 

1. The Application will not install.

PA Turnpike TRIP Talk is currently supported on iOS versions 6.0 and up and should install properly on those versions and subversions of the OS. You may want to uninstall any previous versions of TRIP Talk before installing a new version. Otherwise, a phone reboot before installation may solve the issue.

 

2. I've started the app, but I am not hearing any advisories, what's going on?

Be sure you select “Driving Mode” after launching the app. If you are still not hearing advisories, several items can be occurring:

  • You may be in an area where no advisories are in the radius you selected. If you think there should be, try pressing the "replay all" button on the far right of the audio controls. This will reset your connection and replay active advisories near you.
  • Your advisory radius may be set to a low value.
  • You may not be in range of a cell tower to provide data access. Ask a passenger to look at the phone (or when you are stopped) to check for any possible error messages related to the cellular network. Once you are back in range of your network, advisories should resume.
  • Your phone may be simply attempting to acquire a location for your device. If you have wireless location (settings -> Wi-Fi) enabled, you can generally get quicker response times as the phone can utilize this less accurate location while it acquires a more solid GPS lock. If you only have GPS location enabled, allow the device sufficient time to acquire a lock.

If the app is still not working as expected, then perhaps there was a problem with the download or installation of the app.

When not driving, uninstall the app and re-download and install it in a place where you have access to the internet.

 

3. I am sitting in traffic/an incident and PA Turnpike TRIP Talk did not tell me about it. Why?

You may be arriving to the incident before it has arrived to our system. If you don't hear an advisory shortly, then there could be other factors.

Your phone may have lost internet access. Some areas have weak cellular coverage, so this is possible from time to time. The app will not work without internet access, but when it loses internet access, it will continue to try to automatically reconnect.

If the app is still not working as expected, then perhaps there was a problem with the download or installation of the app. When not driving, uninstall the app and re-download and install it in a place where you have access to the internet.

 

4. PA Turnpike TRIP Talk continues to tell me “There are no active advisories”. Shouldn’t it be silent?

If the app continues to say that there are no current advisories, your phone may have lost internet access. Some areas have weak cellular coverage, so this is possible from time to time. The app will not work without internet access, and when it loses internet access, it will continue to try to automatically reconnect. When PA Turnpike TRIP Talk automatically reconnects, the "No advisories" message will be replayed when there are no advisories.

 

5. PA Turnpike TRIP Talk is giving me advisories that are in an incorrect location. Doesn’t it know where I am?

If the app does not give any advisories, your phone may have lost internet access. Some areas have weak cellular coverage, so this is possible from time to time. The app will not work without internet access, and when it loses internet access, it will continue to try to automatically reconnect.

You should also check your phone’s GPS Settings-make sure the phone’s GPS is turned on and the phone has a clear view of the sky so your GPS can be read and your location and direction of travel identified. This process may take several minutes. If TRIP Talk experiences a GPS error, it will be displayed in red on the Driving Mode screen.

 

6. The screen shows that advisories are playing, why can’t I hear them?

If the screen displays that an advisory is playing, but you cannot hear it, turn up your phone's media volume. There are typically volume controls on the side of the phone, but each phone model may function differently. Check the user guide for your particular phone.

You may also have connected to a Bluetooth connection in your car that is not currently active. Please check the Bluetooth settings (see #18 below).

 

7. How do I minimize the PA Turnpike Trip Talk App to leave it running in the background while I use my phone for other functions?

You can click your phone's "home" button and PA Turnpike TRIP Talk will continue to play advisories for you while you use other phone functions. If you just want to turn off the sound from playing, simply toggle the On/Off switch on the Driving Mode screen to "Off". To have sounds resume playing again, toggle it back to the "on" position.

8. How do I close the PA Turnpike TRIP Talk App?

PA Turnpike TRIP Talk uses the controls right on your device.

For iOS versions 6 and lower: First, Press the Home button once to minimize the app. Then, press the home button twice quickly to display the list of running applications. Locate the TRIP Talk icon (on this screen or by scrolling). Press and hold down the TRIP Talk icon. Now the icons on the screen will start to wiggle and each icon have a red - on the top corner. Find the TRIP Talk icon and press the red -. The app will now be closed.

If you are using iOS 7, Press the home button twice quickly to display the list of running applications. Locate the TRIP Talk icon (on this screen or by scrolling). Swipe up on the screenshot of the app you want to exit. The graphic will fly off the screen and the app will now be closed.

 

9. Advisories were playing, but suddenly playback stopped, what's happening?

Be sure first that you are still connected to your provider's cellular network. (You need to be connected to receive the sound files). If you are connected, the most likely reason for the playback to stop is that another application began playback of another audio file and halted the PA Turnpike TRIP Talk application's audio stream. If this occurs, simply switch back into the PA Turnpike TRIP Talk application's "Driving Mode" screen and press "play" to continue PA Turnpike TRIP Talk audio, if hitting play does not resume the audio or you wish to rehear all advisories, press the "Replay" button on the far right of the audio controls to restart your connection.

 

10. I cannot retrieve a connection upon startup of the application, what's happening?

Either you are not in an area where the cellular data network is not available, or permissions for network usage have been disabled for PA Turnpike TRIP Talk. Ensure your network is within range, and permissions have been set to allow access for this application.

If the app is still not working as expected, then perhaps there was a problem with the download or installation of the app. When not driving, uninstall the app and re-download and install it in a place where you have access to the internet.

 

11. I receive a GPS error upon starting the application, what’s happening?

Ensure that you have provided permissions to the PA Turnpike TRIP Talk application to use your GPS and location settings. You can find this option on your home screen under Settings -> Location Services and then look for the "TRIP Talk" toggle which should be in the "ON" position. The "Location Services" toggle at the top of the screen must be "ON" as well.

Note: If you are unable to toggle the Location Services for PA Turnpike TRIP Talk to "ON", you might have Location Services blocked through Restrictions. Go to Settings -> General -> Restrictions, and enter your passcode. Tap "Location" under the "Allow Changes" menu. Tap on the "Allow Changes" menu item to allow Location service changes. Make sure the toggle for Location Services is "on". Switch the toggle next to TRIP Talk to the "On" Position.

If you are still seeing the message after those options are set, you may be in an area where location data is not available. Try to move into range of several cell towers, or provide the phone a clear view of the sky to collect GPS coordinates.

 

12. How do I change the settings?

On the home screen of the PA Turnpike Trip Talk app, tap the "Settings" button. You may return to the main Audio Control screen by "home" icon at the bottom of the screen, and then the "Driving Mode" button on the app’s home screen.

 

13. Can I select which type of advisories I hear?

Yes. There are several advisory types available for your audio stream, based on the locations you select to hear. You can make changes through the "Settings" page.

Select "Edit Location Preferences" to select nearby states that also provide advisory data to the app. As you travel outside of Pennsylvania, you can hear advisories in these other states. To select the types of advisories you would like to hear, select "Edit Advisory Preferences". You may now select the type of advisory you would like to hear. The Pennsylvania options include the options below. If you have neighboring states selected in your Location Preferences, you will also have Advisory Type preferences for those other states.

  • Turnpike - Non-Construction
  • Turnpike - Construction
  • Turnpike - Detours
  • Turnpike - Information
  • Other Interstates - Non-Construction
  • Other Interstates - Construction
  • Other/Local Roads - Non-Construction
  • Other/Local Roads - Construction

By default, the Non-Construction advisory types are selected for you. Construction Options are not selected by default. They generally do not impact traffic. If you wish to include or exclude either of these advisory types from your broadcast, you may do so through the settings page (access "Settings" by tapping your phone's menu button, and selecting "Settings"). Tap on the Advisory Type Preferences button, and check or un-check your selections.

 

14. I need to call the PA Turnpike - how do I reach someone?

Have a passenger dial, or dial when you are not driving. Tap the "More Features" link on the main screen. If you are using an iPhone, an "Emergency Numbers" button will be available. A list of important PA Turnpike numbers is displayed. Tap the number to dial. You may return to the main screen by tapping the home button at the bottom of the screen.

 

15. Can I calculate my toll through PA Turnpike TRIP Talk?

Yes. Have a passenger operate the phone, or operate the phone when you are not driving. Tap the "More Features" link at the bottom of the main screen. Tap the "Toll Calculator" option. First, select your Beginning Interchange and tap "Done". Then, select your Ending Interchange and tap "Done". Select your vehicle's class and number of axles and tap "Done, and then click the "Calculate Toll" button. E-ZPass and Cash rates will be displayed.

 

16. Can I view the travel advisories on a map?

Yes. Have a passenger operate the phone, or operate the phone when you are not driving. Tap the "Advisory Map" link on the main screen. This will bring up a link to the PA Turnpike's webmap, which displays advisories. Tap on an incident to view the advisory text. To view more layers, simply tap "show legend" to display all available layers.

 

17. I have a comment about PA Turnpike TRIP Talk. How do I contact you?

Have a passenger operate the phone, or operate the phone when you are not driving. Tap the "More Features" link on the main screen. Tap the "Feedback" option. Enter your name and your comments in the appropriate boxes. If you would like a reply, include your e-mail address. Click "Send Comments" to send your comment.

 

18. When I connect my cellphone via Bluetooth to the car, I cannot hear the alerts.

TRIP Talk attempts to play via Bluetooth through compatible setups, but unfortunately not all Bluetooth users/devices will work well. Bluetooth functionally varies greatly between car manufacturers, and different users have very different Bluetooth experiences.

Smartphones generally have two output channels that can be Bluetooth paired - one is the audio of a telephone conversation, and the other is the audio from media being generated by an application (like the TRIP Talk app). Most often cars Bluetooth-pair to the telephone audio by default, so that a telephone call will be automatically broadcast to the car's audio system via Bluetooth, interrupting any other audio playing through the system.

However, in order to broadcast media from your smartphone, a second pairing to the audio system of the car must be performed. Most often you will simply need to check the option on your smartphone's settings to allow sharing of the "Media Audio" (but you need to have the car running, and your phone in the car so that it can see the active Bluetooth). Once you make this pairing, you will no longer hear any media audio output from your smartphone, since the audio is being sent out by way of Bluetooth transmission.

Now, to hear the PA Turnpike TRIP Talk advisories (or other media) on your smartphone through the Bluetooth connection in your car you must select the proper audio input on your cars system. Usually cars have a separate control that allows selection of a variety of input modes, such as SAT, AM, FM, CD or Bluetooth media (or just Media). Select Bluetooth Media (or media) and you will hear both your music and TRIP Talk advisories through the car's audio system.

As Bluetooth connections, car audio systems and mobile technology continue to evolve, we will be keeping on top of the Bluetooth issues and functionality, but there will likely be many differences among cars and devices.

 

19. My location is wrong - the map on my app places me in the middle of the ocean, near the west coast of Africa. How can I fix my location?

This is occurring because your iPhone is not giving the app access to your location. To rectify this issue, your iPhone's location services for this app must be set to "Always." This allows the app to provide alerts even when it is not on the main screen, or when the phone goes into sleep mode. To verify that this setting is correct, go to Settings -> Privacy -> Location Services. Please be sure that the general Location Services button is set to on/green, and then select "Always" next to the app.

 

Have a question not answered here? Please ask!

 

Back
to
Top
PTCWEB02